Spirit GLS Hybrid CO2 Fiber Laser Engraver

Laser Engraving Machine

Spirit GLS Hybrid CO2 Fiber Laser Engraver

The GCC LaserPro Spirit GLS Hybrid is the flagship model of the award winning Spirit line of CO2 laser engraving machines.
Spirit GLS Hybrid CO2 Fiber Laser Engraver
Spirit GLS Hybrid CO2 Fiber Laser Engraver -2
Spirit GLS Hybrid CO2 Fiber Laser Engraver -3
1 1

Laser Engraving Machine

Spirit GLS Hybrid CO2 Fiber Laser Engraver

In succession to GCC LaserPro worldwide accolades features, Spirit GLS Hybrid further upscales its capability to CO2 & Fiber Hybrid laser option in one system, engraving, cutting, marking on organic and metal pieces all possible now.
CO2 & Fiber Hybrid Lasers
GCC LaserPro Hybrid technology allows installing CO2 & Fiber dual lasers in one system to expand your business from organic materials processing to direct metal laser engraving.
RoHS Compliance
All GCC laser engravers are RoHS-compliant (the European Parliament Directive 2002/ 95/ EC, Restriction of Hazardous Substances) and lead-free (pb free). GCC will continue to concern and provide eco-friendly products to protect the earth for our further generations.
DuraGuide
Systematic and reliable motion system embedded with strong mechanical framework and accurate servo motor control technology to deliver superb laser engraving output quality under rapid movement.
Closed-loop DC Servo Technology (Patented)
Spirit GLS Hybrid laser engraver utilizes Closed-loop DC servo motor that delivers greater continuous shaft power at higher speeds than a stepper of the same frame size. In addition, It can also give far greater accuracy for laser engraving due to the continuous movement, instead of constant stopping and starting.
SmartCENTER™ (Patented)
The super user-friendly SmartCENTER™ function helps end users to easily and automatically locate the center point of objects of any shape vastly eliminating tedious setup time.
Astonish 3D Engraving
GCC LaserPro integrates laser firing control and image processing technology to create a 3D laser engraving function, the laser system assigns up to different laser powers to 200 levels of grayscale in the image to make the spectacular 3D effects with different slopes.
TrueImage™ Engraving Technology (Patented)
The patented TrueImage function employs a uniquely designed laser firing algorithm that presents its most vivid form when laser engraving images.
Real Pointer Alignment Feature
Extra beam combiner to align the red pointer with a laser beam, What You See is What You Get.
Rigid and Reliable Construction
Rigid and stable chassis construction of the laser engraver ensures consistent output quality under high speed movement.
SmartACT™ (Patented)
Spirit GLS Hybrid laser engraver SmartACT™ is a groundbreaking technology that reduces the ramping process and job running time for laser engraving, which translates into higher productivity.
Key Switch & Emergency Stop
Key switch safeguards the laser engraver from unauthorized use. Prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment.
SmartLID™ (Patented)
An innovative lid that opens from both ends of the laser engraver allows easy access for daily maintenance.
SmartLIGHT
A Built-in LED light module illuminates the working space of the laser engraver and makes every laser engraving detail easy to see.
SmartPIN™ AutoFocus (Patented)
The plug-and-play probe design makes focusing a one-touch process and provides the accuracy and precision required for optimum quality even when laser engraving on transparent materials.
Intuitive Control Panel Interface
A control panel with coherent hot-key design and graphical icon displays that allows you to change laser parameter settings, set jobs to repeat unlimited times, queue jobs, delete jobs, and more.
Drag-N-Play
An exceptionally innovative and user-friendly feature based on servomotor technology simplifies operations and shortens setup time. Simply hand drag the lens carriage of the laser engraver to the desired position to be engraved and press the start button to commence the job.
Pass-through Front to Rear Doors (Optional)
A design with doors on both ends of the laser engraver to accommodate extremely long working pieces without the need for a screwdriver.
Extra large working Area
Extra large working area for this laser engraver extendable to 38" x 24" (960 x 610 mm). The spacious platform allows laser engraving jobs that require large working space.
Innovative Windows Driver
Directly output from familiar designing software like Illustrator, CorelDraw, AutoCad through GCC LaserPro Windows driver for laser engravers. The innovative driver features SmartCENTER, Air Assist by Pen, Defous by Pen, Bridge Cutting, Drill, Dithering Patterns, and more to reduce set up time and make easy adjustments to achieve marvelous output quality.
Programmable Origin Modes
Easy-to-use multiple position modes allow the operators an effortless way to set up laser engraving jobs with Drag-N- Play. Repetitive workflows can be drastically simplified by relocating the origin position to any desired location.
Built-In Networking Connection
Network connection enables multiple laser engravers to be operated by one PC and multiple PCs to share a single unit of laser engraver. The Ethernet port has made data transmission easier and faster for GCC LaserPro users using network connection. Free your designers with great flexibility and maximum machine versatility.
Automatically Switch Between Laser Tubes
GCC LaserPro dual-laser technology allows users to specify laser types per different color pens with Windows driver setting. The laser system will then switch automatically between laser tubes within one job. No optics change or manual adjustment is needed when switches happen between laser firings.
Removable Exhaust Duct
Easy access for cleaning dust accumulated in the exhaust duct on a regular basis helps maintain the ventilation efficiency and job quality.
Multiple Laser Waveforms (for fiber laser)
GCC Fiber Laser is equipped unique Waveform function allowing greater control over laser pulse parameters such as laser pulse shape, pulse energy and pulse duration which can lead to more efficient and effective processing. Each waveform is optimized for pulse energy and peak power at a given pulse duration and frequency read more...
Purex Fume Extraction System
Purex Fume Extraction System
GCC teams up with a UK company to offer the Purex fume extraction unit for its full-line GCC LaserPro laser engraving and cutting systems. Purex is specifically designed to prevent personnel from inhaling hazardous fumes and dust generated during the process. Noise-free operation, high vacuum capacity, compact design, and long life expectancy, the Purex is CE-compliant that represents the latest invention in exhaust extraction and smoke reduction technology for all types of applications.
Rotary Attachment
Rotary Attachment
Elevate the laser engraver and cutter to a higher level! By using the rotary attachment, laser engraving on cylindrical or round objects is now possible. This option uses the fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixtures available. The minimum/maximum diameter and length of the working object are 7 mm / 150 mm and 650 mm respectively. Its maximum weight should not exceed 4kgs.
Rotary Chuck
Rotary Chuck
The rotary chuck for GCC LaserPro Spirit series and S400 is a handy tool used for laser engraving on cylindrical or spherical objects. In addition to the standard X, Y, Z axis, the rotary chuck allows for the fourth axis which rotates the object 360° to allow for engraving on cups, wine glasses, and even spherical objects. The diameter range of the to-be-engraved object is 0.5 mm to 120 mm and the max. length of the object is 410 mm. Its maximum weight should not exceed 4 kgs.
Stack Light Set
Stack Light Set
The indicator will flash to signal the end of job process and is ideal for working environment where audibility is weak.
Red light stands for “Error”; Green light stands for “ Stand-by”; Yellow light stands for “Machine is working / Insert the pass-through door key”
(This item is available for machine with 5272 V3 Mainboard and afterwards)
Air Compressor
Air Compressor
A specially designed Air Compressor, by using an oil-less diaphragm, helps you eliminate the harmful and damaging side effects of moisture on the laser optics. In addition, it provides the optimal air pressure when laser engraving and cutting to blow away vaporized particles and prevent overheating, keeping lenses and mirrors clean for longer laser life.
SmartGUARD™ Fire Alarm (Patented)
SmartGUARD™ Fire Alarm (Patented)
Laser engraving and cutting operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
Honeycomb Table
Honeycomb Table
A clean and better cutting quality is achieved by the honeycomb table when cutting materials into small pieces. It lifts the workpiece off the work table from hitting by laser reflection. The dust and vapor created during processing are then taken away effectively through the honeycomb cell by a down vacuum funnel exhaust. Rather than handling rigid materials, the honeycomb table also helps to fix flexible materials with the aid of down vacuum to keep constant focus distance and consistent cutting results.
SmartVISION™ Pro CCD
SmartVISION™ Pro CCD
The GCC LaserPro laser engraver features the CCD module, which significantly boosts productivity by learning, memorizing, and precisely locating printed graphics. This allows for contour cutting, automatically adjusting the settings to ensure accurate cuts on various materials. By installing the SmartVISION™ Pro CCD, the working area can be exchanged to 770 mm x 595 mm (30.3" x 23.4").
Please note that the SmartVISION Pro CCD is exclusively compatible with CO2 single models.
SmartPRINT™
SmartPRINT™
SmartPRINT™ software features powerful functions, an intuitive interface, and built-in GCC LaserPro laser parameter setting for both Mac and Windows users. SmartPRINT™ provides clipart libraries, compatibility for various file formats, and advanced graphic functions such as Auto Trace Image Contour, Convert to Rhinestone, Generate Puzzle, and many more. Also, the additional text justification and sizing options can convert stroke to the path.
Grid Cutting Table
Grid Cutting Table
The grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum funnel exhaust. Rather than handling rigid materials, grid cutting table also helps to fix flexible materials with the aid of down vacuum to keep constant focus distance and consistent cutting result.
External Interface Control Board
External Interface Control Board
The External Control Interface Board is an optional item that allows users to set up GCC LaserPro laser engraving and cutting systems for communication with external devices such as odor reduction units, robot arms, and others via a 5V or 12V signal to form an automatic production line. Another useful practice applies in certain working environments when users are required to set up an extra remote interlock control or when laser machines are allowed to be switched off if a security device is triggered.
SmartBOX™
SmartBOX™
An innovative technology for laser engravers and cutters that integrates the ventilation box with a honeycomb table or aluminum grid cutting table. The result is not only a precise cut with sharp edges, but also a clean laser table to work on.
Dust Prevention Window
Dust Prevention Window
When the laser system is on duty, it will bring a lot of dust result from the material and it will contaminate the lenses and mirrors. Dust Prevention Window can keep lenses and mirrors clean to promote longer laser life and increase the effect of air induction.
Multi-purpose Integrated SmartBOX™
Multi-purpose Integrated SmartBOX™
The removable drawer design facilitates the cleaning of the SmartBOX™ of laser engraver making it easy for users to remove fallen debris simply by pulling out and sliding the drawer back in place after cleaning. Various set up choices, such as tipped bars/honeycomb table/platform, and easy transformation conveniently accommodate your work requirements.
AAS Contour Cutting Device
AAS Contour Cutting Device
Developed by GCC LaserPro, AAS is an exceptionally user-friendly operation which offers accurate and faultless contour cutting by automatically tracking the position of graphics for laser engravers and cutters.
Note: Working area and engraving speed will be reduced when AAS module is installed.
*The working area will be changed to 755mm X 570mm (29.7" x 22.4") after installing the AAS Contour Cutting Device.
Spirit GLS Hybrid
Work Area860 x 610mm (34 x 24 in.) Extendable to 965 x 610 mm (38 x 24 in.)
Max. Part Size
(L x W x H) 
All Doors Closed990 x 635 x 177 mm (39 x 25 x 7 in.)
All Doors Open990 x ∞ x 177 mm (39 x ∞ x 7 in.)
Table Size1025 x 705 mm (40.3 x 27.7 in.)
Dimensions1365 x 880 x 1010 mm (53.7 x 34.6 x 39.7 in.)
Laser Source10.6-μm CO2 laser: 30 to 100W
fiber laser: 20W~60W
CoolingAir-cooled, Operating environment temperature 15°-30°C (60°-86°F)
DriveClosed-loop DC Servo Control
Maximum Motor Speed80 IPS
Speed ControlAdjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
Power ControlAdjustable from 0~100% (Up to 16 color-linked power settings per job)
Engraving Capability256-level gray scale image processing capability
Distance Accuracy0.254 mm or 0.1% of move, whichever is greater
Z-Axis MovementAutomatic
Focus LensStandard 2.0" (Optional 3.0" &4.0")
Resolution (DPI)Available 125, 250, 300, 380, 500, 600, 760, 1000, 1500
Interface10 Base-T Ethernet
USB Type-A 2.0  – For USB storage (Max. 32GB capacity, FAT file system) 
USB Type-B 2.0  – For connecting with the computer 
Compatible Operating SystemsMS Windows
Display Panel4-line LCD display showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus
SafetyClass I Laser Product Compliant with EN60825
Class II Laser Product Compliant with CDRH
2006/42/EC Machinery Directive Compliance
Class 4 Laser Product Compliant with CDRH with the optional pass-through door module
Facility Requirements
Operation VoltageBelow 80Watt, 100-240VAC, 50/60HZ Auto Switching, max. 15A
80Watt and above, 200-240VAC, 50/60HZ Auto Switching, max. 15A
Fume Extraction SystemExternal exhaust system with minimum flow rate 800m3/h (CFM 471 ft3/min) is required,2.3kPA negative pressure (Pure-Air PA-1500FS @ 4" exhaust port)

* Speed does not equal to throughput. See dealer or visit www.GCCworld.com for more details.
* The flow rate is determined by a default fume extraction system; the flow rate may vary due to a di fferent fume extraction system.
∆ Specifications are subject to change without prior notice.​

Applications
Contact Us
Please enter the Inquiry page to make a request for prices or to schedule a demontration with one of our local distributors.
START NOW